How To Fix Wi-Fi Related Problems In Sonos Multi-Room Speakers?

Sonos problem – Sonos multi-room speakers are unlike any speaker system that you have used. If you are using this speaker system, then you must have found its working to be highly efficient. In case, you are unable to use the speakers due to Wi-Fi issues, then you can follow the steps provided in the section below.

Sonos Wi-Fi Issues: Fix 1

One of the most common problems that Sonos users may face is a Wi-Fi-related issue. Unlike traditional speakers, Sonos runs on your home Internet connection, which can sometimes be difficult.

If you are using your Controller application and you cannot read or even find music on your system, it may be because your Sonos speaker and Controller device are on Wi-Fi networks different.

To work, the Sonos Controller application must be on a device that is on the same internet network as your Sonos multi-room speakers.

This means that if your phone is connected to the mobile Internet – or to another Wi-Fi network. It’s not your home Internet, it will not work with the Sonos speaker. The patch is pretty simple: make sure your device is connected to the same network as your speaker.

Trending:  Bluesound vs Sonos: What is the Best Music System?

If you find that the speaker was connected to the wrong Wi-Fi network during setup, you will need to configure it again.

Sonos Wi-Fi Issues: Fix 2

If you have a connection but the signal is poor, you can try some solutions.

The simplest solution is simply to bring your Sonos speaker closer to your router or your best Internet source. Because Sonos is based on a Wi-Fi network, you need to make sure that the speaker is close to a router. Rather than having it near your phone or tablet, as it would be with a speaker.

Ideally, your Sonos speaker is in the same room as your router, with a clear line of sight between the two. It’s the best scenario, but it’s not always possible. So, if you cannot do this, try to reduce the number of walls separating the speaker from the router.

Sonos Wi-Fi Issues: Fix 3

If you absolutely want to install Sonos speakers in the farthest reaches of your home, but you’re not convinced that your Wi-Fi is at the cutting edge of technology, you can buy a Sonos Boost. It’s a little tricky concept, so here’s how it works.

Trending:  Sonos Speakers Not Working,Facing Connectivity Problem with Stereo

In a standard configuration, your Sonos speakers, as well as other connected devices, such as phones, tablets, and laptops, will all connect to your Internet router, no matter where they are at home. So, if one of the speakers is far away, he will still have to rely on the weak connection.

But when you connect a Sonos Boost to your router, everything changes. Your phones, tablets, and laptops will continue to connect to your router as usual, but Sonos devices will now connect to Boost over a dedicated wireless network created specifically for the Sonos system.

But it’s getting better: Sonos Boost connects wirelessly through your Sonos speakers. Thus, a Play: 1 element located in the farthest parts of your home could connect to a Play: 1 element closer to the router, which could connect to a Play: 5 elements located closer to the router, which could be connected to the Boost. This should greatly improve the signal in big houses.

Trending:  How To Connect Sonos Into Bluetooth Pairing Mode

Sonos Wi-Fi Issues: Fix 4

If you still facing Wi-Fi problem, the obvious last-resort solution is to connect your Sonos speaker to your router with the help of an Ethernet cable. These can be retrieved inexpensively online or at a local electronics retailer. This should solve all the problems related to Wi-Fi.

Sonos Wi-Fi Issues: Fix 5

Another, slightly more technical solution could be wireless MAC filtering.

When you set up a Sonos speaker at home, it must automatically receive an IP address from your router. But some routers have an “advanced” setting for MAC filtering that prevents the router from giving an IP address to the Sonos speaker until you manually approve it, that is, you add the address. Sonos product’s MAC to a list in your router’s settings.

Therefore, if your Sonos speaker cannot obtain a network IP address, you must add the MAC address of your device. You can find the MAC address at the bottom of your speaker – it will be listed as a serial number. Unfortunately, the addition of MAC addresses may vary from router to router. You will need to check with your router manufacturer for more details. If you do not know yet how to proceed, do not forget.